Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Wednesday, November 11, 2015

DIY Buck Saw Construction

So for those of you who are minimalist campers and want to cut weight anyway that you can this is one way that I do that during the Spring through Fall. You can simply carry two key rings and a saw blade instead of a full buck or bow saw into the field. I will typically pair this saw blade with a Bacho Laplander on my hip and a multi-tool in my pack. If you are into carrying an 18th century bed roll (check out mine from last year HERE: LINK) if you leave the saw blade in the cardboard sheath it will slide right into the blanket roll. So why choose a buck saw over a bow saw? Initially I would always make a bow saw as it takes less than five minutes to make and gives you a viable saw to craft your buck saw with, make your initial shelter and gather firewood for the first day. Essentially I would get my immediate needs out of the way and then at night by the camp fire spend an hour or two crafting a buck saw (if you don't have much cordage this may not be an option for you). So if the bow saw is faster and will cut essentially the same size material then why waste time and resources to make a buck saw? In my experience, a buck saw has less blade movement is more comfortable, can process more wood faster and the blade will have a longer life.

Buck Saw Instructions In Pictures:
1) So where does one start in making a buck saw? Find a small tree (straight as possible) with a width of roughly three fingers and roughly five foot long. (save a smaller piece of the tree for the tension bar).
2) Get out your saw blade and two key rings as this will be used to measure your saw (cross bar should be the length of the saw and your uprights should be 2/3 the length of the saw or whatever is comfortable for you.
3) Use the blade of your saw (used gloves), baton your belt knife or make a bow saw to make your three longer sections. You want the upright to be the thickest portions of the tree as your will be carving notches in them, the smallest portion for your tension rod and the rest for your cross beam.
4) Baton or cut a slot at the end of uprights slightly deeper than the blade width of your saw blade.
5) Insert your saw blade into the uprights as shown and pull tension on them so that the key ring is tight against the upright. This allows you to measure your cross beam placement. Pick a place around halfway up the upright and score a line for where you will carve your v notch and do the same on the opposite upright.
6) Carve the cross beam into a wedge, start with a wider wedge and work your way in as needed to match the V notch you will be making in your upright.
7) With the V notch in the upright start thinner and you want to end up with the notch being around half way through the upright. You will need to keep adjusting the upright and the cross beam until you have a nearly perfect fit (test by squeezing the uprights together and see if there is sway). After completing this notch move to the outside of the upright and make a very small notch 1/2" from the top to keep the cordage secure.
8) This should leave you with the components below. I noticed I forgot to take a close up of the tension bar but essentially all you have to do is carve a mall notch around the top of the tension bar to hold the cordage in place.
9) Now all you have to do is put the saw together and get to work. Make a loop about 1" longer than needed to wrap around the two uprights. To tension the saw wrap the cordage around the tension bar twice in the groove and then loop it around the uprights. Then simply spin the tension bar until the wood stops creaking and stop before your cordage breaks (bank line can save you here- I over tensioned the bankline the first time to see how much it could take and even after it broke it still held together and I was able to keep using the saw for several hours.


Conclusions:
I have a love/hate relationship with DIY buck saws as they take awhile to craft and delay your your ability to cut larger wood. If you carry a bacho laplander into the field then you are golden initially and have time to craft  a saw in your down time. The buck saw saves energy over a bow saw and over a bacho laplander as you're able to cut larger diameter wood with less cutting strokes. While a commercial buck saw like the Stowell Outdoor Solutions buck saw I compare the makeshift saw to in the video is much faster to put into place it is much lighter to carry a saw blade.  If you haven't tried to make one of these DIY buck saws I highly recommend that you get out and practice this skills as the more skills you carry into the woods the less equipment you will have to carry and the more self reliant you will become.

Visit Us On Social Media: 
Consulting Company Website: http://jpsconsulting.webs.com/
Have something outdoor/bushcraft/trapping/preparedness/hiking/camping/fishing/hunting related you want me to make a post about? Leave me a comment and I will see what I can do! As always feel free to leave your questions and comment below! Also if you enjoy the blog please vote for us on the following websites to help us reach a wider audience:
 
You are only able to vote once DAILY using this site! Currently we are just outside the top 20 on this site.  
AND
  You are able to vote DAILY on this site! We are currently ranked # 2 on this

Wednesday, November 4, 2015

DIY Bow Saw

Last year I fashioned a bow saw from a snare wire/saw (See it in action HERE- LINK) in my Micro 10 C's Kit (Link- HERE). I have upgraded saw options several times and when I'm taking out a lightweight late fall kit I tend to pack just a saw blade that is 21"-24" along with two key rings affixed to my axe. Alternatively you can carry this gear inside your belt although I don't particularly like the idea due to the possibility of getting cut without significant modification to the belt. Carrying just a saw blade reduces your pack weight significantly and can provide you with a significant cutting tool in for making long-term shelters, cutting fire wood and much more. The best thing about this improvised saw is that it takes less than fifteen minutes to make and can be made easily with just the saw blade and a belt knife or simply just the saw blade. The video below shows the saw in action and I will provide you with step-by-step directions below.

Need A Saw? Try One Of these For Your Kit!



So How Do You Build a Bow Saw?
1) So what do you need to make this saw? Just a saw blade will work but a good belt knife to baton the the saw helps speed up the process and saves your hands from the bacho taking a bite out of you.
2) Cut your live bowed branch (make sure you have to bend it at least 4" in to get sufficient tension and cut it off several inches long as you can adjust the saw back in camp.Once you get back to camp pick the end that you want to start with and baton a 1.5" lit into the limb inline with the bow. Place a key ring through the hole at the end of the saw and then bend your saw to the determine the point where you need to trim your limb down to, mark it with your knife and then baton through at that point. You can then split the limb inline with the bow, make sure the two slots are as close to lined up as possible as additional torque can damage your saw blade and cause it fail prematurely.
3) Secure both ends of the saw with cordage using a timber hitch and about a 4' wrap and finish the wrap off with a loop that will slide over the end of the limb. This provides for a very secure saw blade that will hold up for long-term use in camp. 
4) Put that darn saw to work cutting whatever you need. While it may not perform as well as some commercial variants, if you take your time you can get the performance level very close and the difference is so minimal that the weight savings is well worth the extra time it may take you to craft the tool. Strap a couple different saw blades (same size so you only have to make one size bow or buck saw and can simply change blades) for different tasks to your axe or throw them in your pack and you will be ready for some extremely hardcore wood processing on the fly. Helpful hit... Buy the Bacho blades i have a link to above as they will last for quite awhile and cut through wood like a hit knife through butter. Also if you're going to buy a buck saw like I have be sure to buy saw blades that will fit that saw and can also be utilized to make improvised saws for fall and spring when you might not be processing as much fire wood.

Conclusions:
This is one of my favorite things to craft in the wood as it saves weight, works well and is a significant upgrade from the wire saw bow saw I crafted last year as the durability goes through the roof along with effectiveness. For less than $10 you can process significant diameter lumber for shelters, firewood and anything else you can think imagine. Fifteen minutes of your time and one saw blade offer you a significant upgrade to your belt saw (Bacho Laplander for me!) as you can cut the same log with about half of the effort.

Visit Us On Social Media: 
Consulting Company Website: http://jpsconsulting.webs.com/
Have something outdoor/bushcraft/trapping/preparedness/hiking/camping/fishing/hunting related you want me to make a post about? Leave me a comment and I will see what I can do! As always feel free to leave your questions and comment below! Also if you enjoy the blog please vote for us on the following websites to help us reach a wider audience:
 
You are only able to vote once DAILY using this site! Currently we are just outside the top 20 on this site.  
AND
  You are able to vote DAILY on this site! We are currently ranked # 2 on this


Monday, July 20, 2015

Splitwood Tepee Fire Lay

This week we will be digging into fire craft a little deeper and looking at the Tepee fire lay using split-wood. I end up using this fire lay a good bit in the woods and most commonly use it for the following tasks: 1) signal fires; 2) wet condition fires; 3) cooking/boiling; 4) rapid rewarming; 5) creating lots of light for keeping predators at bay; and 6) making a platform for a star fire.

Need Additional Help Getting Your Fire Started? Try a few of these methods:  Dryer Lint Tinder Bundle  (LINK); Gorilla Tape Tinder Bundle (LINK); Rub Cloth (LINK); Dragon Ball Fire Starters (LINK); Char Cloth (LINK); Solar Ignition (LINK); One Stick Fire (LINK); Fire Pad (LINK); DIY Fire Starter: Cotton & Petroleum Jelly Modification  (LINK); Camp Fire vs. Survival Fire vs. Cooking Fire (LINK); Building a Sustainable Fire In Wet Conditions (LINK); Split Match Trick (LINK); Survival Resources 4x Fresnel Magnifier (LINK); Fatwood Fire (LINK); Evolution of My Pocket Fire Kit (LINK); Split Wood Fires: Using Your Knife As A Spokeshave (LINK); Cattail Fluff Used as Flash Tinder (LINK); Wetfire Tinder (LINK); Twig Bundle Fire (LINK);What I like to Use For Tinder Bundle Materials (LINK); Fritos Tinder Bundle (LINK); Splitwood Log Cabin Fire (LINK).

The video below covers everything from building, lighting shavings with a ferro rod, talking about the fires use and general conversation about the practicality of the fire lay. Just click on the play icon in the picture below for the video to start automatically.

Need Help Getting Your Fire Started?


So Here are A Few Pictures Of The Process:
1) Split-wood fire material laid out in pencil lead, pencil and thumb or slightly larger
2) Scraping tinder bundle with enough material to fill a baseball hat
3) This fire lay as setup above will shed water greatly and produce one heck of a a large fire (see below). If you are going to leave this for an extended period of time just cover with pine and you will have a dry fire lay whenever you need fire.
4) As you can see this fire will take off quickly, make a lot of light and put out a ton of heat. You can easily control the heat and light from this fire lay by simply adjusting the amount of wood on the fire lay.
So Lets Dig Into What You Can Do With This Fire Lay:
Signal Fires: If you are not going to build a tripod based signal fire (See how here -LINK) this is what I would do should you need to make a rapid signal fire (note- in wet conditions build this fire on a platform so water does not collect in your tinder bundle). To make this a signal fire all you would need to do is pile lots of pine onto the fire (cover the opening until its time to light the fire then remove and place elsewhere as you will need this opening for air flow). The pine on top of this fire lay will shed nearly all of the water and keep the fire lay incredibly dry and ready to start in an instant. The fast take off you get from this fire will increase your ability to be seen with lots of fire and lots of smoke. Remember if you are making signal fires make three of them and ensure they are evenly spaced around your camp in the open area.

Wet Condition Fires: Being that this is a split wood fire it is already optimal for wet weather, add to this the fact that the shape of this fire is naturally moisture rappelling and you have lots of fire fast. The best thing about this fire is you can put the split wood in the center around your tinder bundle (keep a tarp over you when splitting the wood and making your fire lay) and then pile on the moist or wet wood which will quickly dry out as the dry wood underneath burns. You essentially get  a fast burning fire to quickly dry your outer layer of wet wood, which provides you with a
 
 Cooking/Boiling: This is one of the best fires for boiling as it puts a concentrated amount of heat at the top center of the fire lay. I don't use it nearly as often as the Log Cabin Fire Lay (See How To Make It HERE- LINK) as it takes a little longer to get a good base of hot coals but you can do a decent amount of roasting (marshmallows, hotdogs, other camping with kids type of foods) with this fire lay. For use as a boiling fire be sure to have a tripod (Learn To Make One Here- LINK) to move the container up and down as needed to control the process.
 
Rapid Rewarming: As you can see from the video this fire lay gives you get a lot of fire fast. This fire provides body wide and high fire within a few minutes (granted it about 45 minutes to an hour of prep). Keep this fire lay ready in camp for whenever you may need it and it will see you through the hard times. 

Creating Lots Of Light For Keeping Predators At Bay: One look at this fire and most predators will not only keep their distance but avoid the area. This is a lot of fire and will more than scare off nearly every predator in the woods (warning may attract 2 legged predators).  While this fire will not burn all night like many others it does afford the opportunity for lots of heat and fire rapidly and that is exactly what you need when you have a bear, wolf or cougar knocking at your door.

Making A Platform For A Star Fire: While any strong bed of coals will provide you with a solid platform for a star fire this one seems to work decent. I do prefer to use the Log Cabin Fire Lay for this function as it uses less wood overall and will provide a great coal base for the fire.
 
Conclusions:
The tepee fire lay is one of the most essential fire lays that you can bring to the table in the woods. The fire lay can be made in advance of a fire and even when it rains will be essentially shielded from the elements, add some pine to the top of the fire lay and you have a virtually water retardant fire at the ready. While its not my main fire lay (I use dead twigs/wood I collect from the ground 90% of the time using this fire lay- See It Here LINK) or I use a twig bundle fire when moving from camp to camp (see how to make it here- LINK) I do believe it is highly functional for the purposes I listed above in detail. My standard use for this fire is when prepping a fire for the night or when building a fire for very wet conditions (i.e. prolonged driving rain when I cant have the fire area covered or don't want it covered). This is often the third fire lay I teach people (twig based chaos fire then log cabin fire lay) as it is extremely flexible but slightly harder to master than the previous two fire lays. 
 
Be sure to join us each Tuesday night at 9pm Eastern Time on American Preppers Network's: Prepper Broadcasting Network for the 7 P's Survival Radio Show (http://prepperbroadcasting.com/the-7-ps-of-survival/). If you have a suggestion for a show topic or know someone who would like to be a guest then please feel free to contact me by email (joshsemailfilter-7psblog@yahoo.com). 

Visit Me On Social Media: 


Consulting Company Website: http://jpsconsulting.webs.com/



Have something outdoor/bushcraft/trapping/preparedness/hiking/camping/fishing/hunting related you want me to make a post about? Leave me a comment and I will see what I can do! As always feel free to leave your questions and comment below! Also if you enjoy the blog please vote for us on the following websites to help us reach a wider audience:
 
You are only able to vote once DAILY using this site! Currently we are just outside the top 20 on this site.  
AND
You are able to vote DAILY on this site! We are currently ranked # 2 on this

Wednesday, July 15, 2015

Weekly Survival Challenge: Water Gathering and Purification

This week's Survival Challenge from the 7 P's Survival Show on American Preppers Radio (Listen to this weeks radio show HERE- LINK) is the gathering and purification of water using whatever you may keep in your outdoor kit. In the video below I explain the weekly challenge in a little more detail. On next weeks show we will talk in great detail about water collection, gathering and preparedness for disasters where water can be a concern (i.e. chemical spill in southern WV, oil spills and the great lakes algae incidents). If you missed the first survival skills challenge you can find it here (LINK) and you can find my first radio show here (LINK).

Here Are A Few Older Posts That May Help On Your Journey To Gather And Purify Water

DIY Tripod Water Filter (Link To My Instructions On The Process): Anytime I make a permanent camp this is my go to method for filtration and boiling of water. If you want to make a raised bed you can do so between two tripods using one as a camp chair and one as the water filter to maximize the space and resources within your camp. While I like my sawyer squeeze for backpacking I think that this filtration and boiling method provides a better tasting water while yielding water that is as clear and clean as the that of the sawyer filter.

DIY Plastic Water Bottle Filter (LINK to My Instructions on the Process): So you find a plastic bottle out in the woods and are in need of a water filter as your day hike turned into an unexpected overnight and you're out of water. Just add ground up charcoal (not commercial as it has many chemicals in it, get it from your camp fire), sand, leafy green material and cotton between each layer then just add water for your own DIY water filter!

Testing The Sawyer Squeeze Water Filter (LINK To My Review): As I stated above this is my go to filtration method when backpacking. I can use the platypus bags, hook it to a water bladder or a plastic bottle and use it on the go. I prefer this method to a LifeStraw as it allows me to filter as I go and not stop and drink all of my needed water at the source.

Using Aluminum Foil As A Makeshift Container For Boiling Water (Link To My Instructions on the Process): I keep Aluminum foil in every kit I carry, in my wallet and even on my survival bracelet. A container is without a doubt the hardest survival necessity to craft in the wild aside from a knife and I always have both on my person. If you haven't practiced using aluminum foil as a container I highly encourage it but do yourself a favor and use heavy-duty aluminum foil and essentially make a fist, place it in the center of the foil and then wrap the foil around your fist. You can see this skill in practice during a minimalist testing of a survival bracelet (See My Testing HERE).

***Note On Next Few Links- While boiling in a plastic container is possible it should be thought of as a last resort. If you are going to die of dehydration and have no other method to purify water then I personally would take the long-term risk of cancer over dehydration. You can make a burnt out container from wood, use a bamboo container and much more to avoid using plastic. So moral of the story, know how to boil in-case you only have a plastic container, know that heating plastic to boil water can potentially cause cancer long-term and know alternatives to make containers in the woods.***

Produce Bag Used For Boiling and Filtering Water (LINK to My Instructions on the Process): I always keep a produce bag in my EDC bag (See it HERE) and also in my micro 10 C's Kit (See it HERE). These bags are free at every grocery store and as I show in the article can be used to both filter and boil water, but it also can be used to collect and carry water over distance. Leave the bag over foliage on a tree during the day and you will have some water collected by the time night comes. This is one of the most versatile containers you can carry in a wallet and aside from aluminum foil is my second favorite micro container.

Stone Boiling Using Tandem Stones (LINK to My Instructions on the Process):This is my favorite means of boiling when I don't have a container. An old log hollowed out with an axe with water added and then several stones heated in a fire added will get your water boiling rather quickly. Depending on the size of your log you can process a ton of water with this method.

Stone Boiling In A Plastic Container (LINK to My Instructions on the Process):This is essentially the same process with just a smaller container. For this article I used a water jug and a single granite stone. Remember to be sure that you are using a very hard rock for this process or you can have an exploding rock on your hands!

Boil Water In A Plastic Container Suspended Over Flame (LINK To My Instructions On The Process):This is one of the hardest ways to boil water as you have to ensure that the flame never touches the container because if it does you will have a hole in the bottom of your container. If you only have a very thin plastic container (platypus bag) or a hydration bladder this may be your only option. Just be sure to watch the fire carefully and use a tripod to adjust the bag so that it never touches that flame!

Boil Water In A Plastic Container On Hot Coals w/ No Air Space (Link To My Instructions On The Process):With a water bottle this works great! Now I will say this is a 2 shot deal for the most part. I have tested this out several times and two to four are about all you get out of the bottle before it gets too thin and eventually a hole is burnt through the container.

Other Means of Collection and Purification to Look Into: In the last two years I haven't covered some of these things but do have plans to do so in the future but there are only so many posts I can fit into a week. So here are a few other things to look into for your kit and skill practice: 1) chlorine droplets per container to purify; 2) water purification tablet; 3) chlorine tablets; 4) bamboo boiling; 5) steripen; 6) other survival water filters; 7) distillation; 8) digging a hole beside a creek or river for cleaner water; 9) using clear plastic to collect water (several means to do this); and  10) water vines. While there are many more methods of obtaining and purifying water these will be more than sufficient to get you going on testing your kit and working on your water purification skills.

Need Some Items To Practice? Try These:
 

Conclusions:
Water collection and purification is in a tie for the top life saving survival skills with fire craft. If you can't control core temperature and rehydrate then quite simply you're dead before you even started trying to survive. So with that being said, get out there and test your gear, skills and environment. Learn by doing and you will find what works the best for you! Be sure to share your pictures, videos and lessons learned with us on here, social media or YouTube!

Be sure to join us each Tuesday night at 9pm Eastern Time on American Preppers Network's: Prepper Broadcasting Network for the 7 P's Survival Radio Show (http://prepperbroadcasting.com/the-7-ps-of-survival/). If you have a suggestion for a show topic or know someone who would like to be a guest then please feel free to contact me by email (joshsemailfilter-7psblog@yahoo.com). 
Visit Me On Social Media: 


Consulting Company Website: http://jpsconsulting.webs.com/


Have something outdoor/bushcraft/trapping/preparedness/hiking/camping/fishing/hunting related you want me to make a post about? Leave me a comment and I will see what I can do! As always feel free to leave your questions and comment below! Also if you enjoy the blog please vote for us on the following websites to help us reach a wider audience:
 
You are only able to vote once DAILY using this site! Currently we are just outside the top 20 on this site.  
AND
You are able to vote DAILY on this site! We are currently ranked # 2 on this

Wednesday, July 1, 2015

Outdoor Cooking: Crawfish The Lobster Of The Backwoods Creek!

Just because you are out in the woods doesn't mean you cant eat like a king! While I like a spring/summer salad just as much as the next person (man some days you really want a little Italian dressing) but sometimes you just want a little seafood boil! Crawfish are often found freshwater creeks and ponds and can be easily caught using net systems or "bait traps" I plan to do an article on making one of these bait traps out of old two liter pop bottles in the near future (I use them for minnows and craw fish a good bit, all you have to do is bait them and then set them for the night). This batch of crawfish I was able to get off the banks of a creek where a friend "raises" them so there were literally hundreds of them crawling around,  normally on a West Virginia creek or pond your average haul would be a dozen or less for the night but when added to fish and greens it makes for a great meal.
Need Supplies to Catch & Make Your Own Crawfish? 
Try Some of These Items:
 

Be Sure to Check Out My Older Outdoor Cooking Posts:
Other Outdoor Cooking Posts: Pioneer Pumpkin Pie; Teays Valley Corn Bread; Shore Lunch Cheddar Potato Soup Vs. Bear Creek Cheddar Potato Soup; Betty Crocker Blueberry Muffins; Bear Creek- "Darn Good" Chilli; Low Country Boil; Mountain Man Stew; Bear Creek Gumbo; Idahoan Hash Browns; Preparing Trout- Recipes to Try; Wild Edible- Wild Onions; Wild Edibles- Leeks (A.K.A. Ramps); Wild Edibles- Winter Collection; Martha White Chocolate Chip Muffins; Catfish Pond to Plate;

Outdoor Cooking Tool Posts: Improvised Container; Trangia Mess Tin; Rotating/Adjustable Pot Hanger; Stripping and Re-Seasoning Cast Iron; Baking Over A Camp Fire; Cheap Bomb Proof Bush Pot; Modified Primitive Pot Hanger; Series Introduction; Pathfinder Bottle Cook Set Review; DIY Hobo Stove;  
 So How Do You Cook Crawfish?
Your first step in making Crawfish is to bring your water to a boil.
I usually add 3 table spoons of Old Bay before I bring the water to a complete boil before adding crawfish, seafood, etc.
Allow the crawfish to cook for thirty minutes (on low if you're using a burner or over hot coals and not fire if cooking over a fire). I always seem to use the log cabin fire lay to get my bed of coals (find out how to make it here- LINK).
Once your crawfish finish cooking for 30 minutes dump them out onto an Aluminum foil container or colander. You can punch a few holes into the aluminum foil to allow the water to drain (I try to dump most of it out before pouring it into the foil). I then get some clean water to pour over the crawfish to get the excess powder off the crawfish. 
So now that they are done how and what do you eat? The video above takes care of all of those questions for you, just watch the video and learn how to eat one of the great gifts of nature.

Conclusions:
Crawfish are some of the best food you can find in the woods! They work great as bait for large freshwater fish, are great to eat and can be used for trapping purposes after you have got the meat out of the tail. This is yet another reason why Old Bay has a permanent home in my bushpot beside salt, pepper and olive oil as my lone seasonings. You can easily find crawfish early in the morning or right before dark along the banks of most freshwater streams or you can place overnight water based traps for them using a wide variety of nets, wire pot traps or even a two liter bottle trap. If you haven't tried them I highly recommend you get out there, find a few and boil them up for dinner!

Be sure to join us each Tuesday night at 9pm Eastern Time on American Preppers Network's: Prepper Broadcasting Network for the 7 P's Survival Radio Show (http://prepperbroadcasting.com/the-7-ps-of-survival/). If you have a suggestion for a show topic or know someone who would like to be a guest then please feel free to contact me by email (joshsemailfilter-7psblog@yahoo.com). This coming Tuesday we will have Josh Chavez on the show talking about his experiences on History's hit new survival show ALONE!

Have something outdoor/bushcraft/trapping/preparedness/hiking/camping/fishing/hunting related you want me to make a post about? Leave me a comment and I will see what I can do! As always feel free to leave your questions and comment below! Also if you enjoy the blog please vote for us on the following websites to help us reach a wider audience:
 
You are only able to vote once DAILY using this site! Currently we are just outside the top 20 on this site.  
AND
You are able to vote DAILY on this site! We are currently ranked # 2 on this site!